Products
Primer 100
Stone Edge Surfaces Primer 100 is a Primer and extreme bonding agent or bonding primer, and is designed to permanently adhere or bond, both chemically and physically, any of the Stone Edge Surfaces overlay mixes to a substrate.
Pro trowel mix
Stone Edge Surfaces Trowel Mix is a commercial grade, polymerized, Fiber Reinforced, fine Sand and proprietary additive enhanced concrete overlay mix that allows a 2 to 6 hours of working time.
Pro stamp mix
Stamp Mix is a single component just add water polymer, fiber, aggregate and proprietary additive enhanced, professional concrete stamp overlay mix.
Pro wall mix
Wall Mix is perfect for vertical or overhead applications, it’s 1/3 lighter than standard concrete or mortar mixes and can be applied from 1/4” up to 4+” without drooping, sloughing or sliding.
Pro bond
Stone Edge Surfaces Pro Bond is a commercial grade, heavily polymerized, multi-use, base coat and extreme bonding Single Component just add water underlayment and repair concrete mix.
SwiftSet Self-Leveler
Stone Edge Surfaces SwiftSet Self-Leveler is a fast setting (2-4 hours) and walkable in (4- 6 hours), pre-sanded, single component just add water, polymer enhanced, Portland cement and proprietary additive self-leveling underlayment or base coat mix used to create a smooth flat and level surfaces for the installation of various flooring types. SwiftSet Self Leveler is used to repair or level low spots in concrete substrates.
Smooth coat
Smooth Coat Mix is used in commercial or residential interior or exterior applications to achieve a Smooth (slurry) base or top coat and as a texture coat, broom finish, knockdown, skip trowel or other texture look.
MicroTop
MicroTop Mix is applied as a micro-thin concrete resurfacer over almost any concrete, concrete overlay, or stone veneer surface.
Product 4
Spread a perfect thickness of Stone Edge Surfaces overlay mix every time using the precise CAM sizes on your Gauge Rake (Depth Tool) which are set at specific depths. After applying and raking to get the perfect depth…use a trowel or smoother to smooth out your overlay mix and get it ready for stamping or carving.
Product 4
Stone Edge Surfaces Joint Cutting “Round End” concrete carving tool is the perfect decorative concrete or concrete overlay carving tool.
Pro Seal Supreme
Stone Edge Surfaces Pro Seal Supreme is a UV stable, non yellowing water based, Semi-Gloss finish, 20% solids, and Low Viscosity Epoxy Infused Acrylic sealer with excellent penetration and adhesion qualities when used on clean and unsealed new or existing concrete and concrete overlays. Pro Seal Supreme goes on white and dries clear, is low VOC and compliant in all states
Liquid Colors
Stone Edge Surfaces Liquid Colors are a blend of natural iron oxide pigments and water that come in 16 beautiful colors, packaged in 32 OZ bottles. Liquid Colors are mixed with Stone Edge Surfaces Pro Seal (shown in picture above) and Pro Seal Supreme. These water based sealers are the rheological agent needed to carry the natural pigments deep into the concrete to give a lasting beautiful rich color.